Ring Pillow Inspiration!

17 08 2009

One beautiful thing about the interweb is all of the awesome inspiration that you can get for practically anything you can dream up! On the menu for today? Ring pillows!

While this is the norm:

Ring-Pearl-HeartThere are just too many tasty options out there for me to go this route!

Exhibit A:

Check out these gorgeous pillows from oromono.


Exhibit B:

These are from Llubav

1fd30ee835590cExhibit C:

Here are some others from etsy that are just to die for!

I’m pretty sure I’m going to DIY my ring pillow, so I’m so glad that I have all of these great ideas to inspire me!

What cool ring pillows have you seen around the webs? ūüôā


DIY – The Photoline!

3 08 2009

Hola everybody!

I knocked out another DIY project yesterday and I thought I would share with you guys, what I’m calling my Photoline!

You may remember this picture from my inspiration board:


I wanted to see what I could do to create something like this that I could put inside, maybe by the guestbook instead of a bunch of picture frames, and then we’re also going to have a digital photo frame doing a slideshow of pictures of us through our lives/relationship.

This was kind of challenging to me because I had to come up with something that could hold the poles up and would be appropriate for being inside… how far apart to make them, if it would still look good if it was much smaller than the one in the inspiration pic, etc.

This is what I came up with:

Here are the supplies:

2 Flowerpots

Floral foam (enough to fill up your flowerpots)

*not pictured* something heavy, rocks(?) to go in the bottom of your flowerpot for stability

craft paint/acrylic paint/whatever you have around

foam brushes/paint brushes

glue gun / glue sticks


saw / knife (Must be strong enough to cut the wooden dowel)

1 wooden dowel cut/sawed into 2 pieces, mine was 48″ tall, so when cut in half, they are 2 ft tall each. The one I used had a 7/16″ diameter

sandpaper for sanding down rough edge that was cut on the dowel so that it will stand flat


small silk flowers

2 wooden buttons (I used 1/2″ diameter ones)





1. Plug in glue gun with a glue stick in it, and make sure you have a piece of paper or something under the tip so you don’t get glue on anything.

2. If not already done so, cut dowel into two 2 foot pieces (1 for each flower pot), and use your sandpaper to smooth the rough edge down from where it was cut so that it will stand up flat in the flower pot. If this is not done, your dowel could lean. Also, wrap the sandpaper around the dowel, and then grab the dowel where the sand paper is and run the sand paper up and down the dowel a couple times to smooth the dowel and ensure smooth painting.Rub off any wood dust created from this step.

3. Put rocks/other heavy substance in bottom third of flower pot. (Important, this will create stability!) Then put your foam on top of the rocks up to about a centimeter from the top of the pot. You may have to cut your foam for it to fit into the pots, a kitchen knife or the saw will work well for this. If there are any big gaps between the foam and the wall of the pot, you can fill them with pieces you trimmed off of the foam. The foam doesn’t have to be perfect since you’re putting moss on it later.

4. Put a dowel through the middle of the foam and push it to the bottom of your pot, making sure the dowel is as straight as possible, mine wasn’t 100% straight at first, and I used foam shavings to compensate for the angle it was leaning at and that fixed it perfectly. Use your glue gun and put glue around the perimiter of the foam to keep it from slipping out of the pot, put glue at the base of the dowel as well.

5. Glue a wood button to the top of the dowel, push it down to make it sit as flat as possible. Paint your pot and dowel with one coat of paint, making sure to get the inside rim of the pot as well. You don’t have to paint the bottom of the pot if you don’t want to. Set aside to let the paint dry and follow steps 1-5 to create your other pot/dowel contraption. Once done painting the second pot/dowel, put a second coat on the first, and once done with that go ahead and put a second coat on the second pot/dowel.

6. Go back to the first pot (that should be dry at this point from the second coat of paint.) And put a good coat of hot glue over about 1/2 of the top of the foam. Put moss over the glue, and repeat glue/mossing for the second side of the pot. If you missed a spot, just put a spot of glue and a small piece of moss where you missed. Use your scissors to shape the moss as you like, mine was a little lumpy, so I trimmed the moss down so it was even across the top of the pot. Cut the heads off of some of your small flowers, leaving about 1/8″ of stem and stick them into the moss as much as you like. Repeat step 6 for second pot, and tie ribbons around each pot. I used some double sided tape to keep the ribbon where I wanted it.

7. Measure out 1 or two pieces of twine so when tied onto the dowels, they’re as far apart as you want them to be. Mine twine was 43 inches long and I had two pieces of it. Tie the twine tight into a knot around your dowel in the spot you would like it, and then find the corresponding spot on your other dowel to tie the other end of twine to creating your clothesline. Trim off any tails from the twine so you don’t have excess showing, if you mess up with the twine you can cut it off and do another one.¬† Repeat for your second line if you’re having one.¬† Tie bows of ribbon if desired at the top of each dowel. *note* Make sure if you’re having more than one line, that one isn’t tighter than another or it could make it easy for your pots to fall over!

8. Attach pictures using small clothespins or paperclips, and make sure they are evenly dispersed across your clothesline. Clean up any mess you made, have some cookies and enjoy your handiwork!

Yay! The photoline is finished!

Cost breakdown:

Pots – $1.50

Wood buttons – a bag of 18 for $1.00… and I used two.

Dowel – $0.84

Foam – $3.00

Glue $0.20 worth of glue sticks

Flowers – $1.50 with left overs

Paint – On hand – Free! (You can get the kind I used for under $1, and the foam brushes cost about a quarter)

Ribbon – On hand… I used about 1 1/2 feet of the small ribbon and about a yard of the bigger ribbon… so probably about $2.00 worth of ribbon.

Rocks – Free from outside (You can get a bag of vase filler rocks from dollar tree)

Sand Paper – $1.50 with leftover

Twine – $2.00 with lots leftover

So depending on what you have on hand… you could pull this off for about $13.00. Not bad for something super cute!!

See you guys next time!!


DIY – “I DO” letters

28 04 2009

I Do Letters

Hello! Sorry it’s been a little bit since I last blogged. I’ve been fighting off an allergic reaction grouped with a lovely case of hives from something I ate last week, and the medicine knocks me out so I haven’t been up to blogging!

Today I would like to share a ridiculously cheap and easy DIY project of I DO letters. I actually wasn’t planning on doing these but I came across the letters at Michael’s and they were so cheap, I grabbed them up and took them home.



I DO letters – wooden is best for durability, but styrofoam is okay too, just be careful with them. 99¬Ę each at Michael’s for 4″ wooden letters.

Glue – Already on hand, Aleene’s Original Tacky Glue. Any craft glue should work, but if you don’t have any, you can get a small bottle of Aleene’s for 99¬Ę at Michael’s.

Glitter – Any color. I already had some I got on clearance without a purpose in mind knowing I could use it for something. It had 5 shades of blue for 97¬Ę at Michael’s. Check the dollar bins, they might have your color of glitter in there.

Foam Brush – 30¬Ę – I used a 1″ one.

Piece of paper folded in half and unfolded to catch glitter – on hand – free. Use a piece of junk mail if you don’t have any paper.



1. Add glue to letter. It is best to do them one at a time so the glue doesn’t dry. Use foam brush to spread it around. Make sure you get it in all the crevices of the letter. *note* I used more glue on the letter than pictured here. ūüôā


2. On top of the piece of paper, sprinkle glitter liberally all over the letter. Make sure to get it on every bit of the letter. Look at it from all angles. Tap letter to remove excess on top of the piece of paper.

3. Set letter aside to dry for a moment. Carefully pick up the paper, and fold it along the crease so that the glitter gathers in the crease. Put glitter container up to corner of paper where the crease starts and carefully pour the glitter back in the container.

4. Repeat for remaining letters. Set aside all 3 letters and let them sit for 5 to 10 minutes while you catch up on Whose Wedding is it Anyway? or Bridezillas.


5. Touch up letters with glue and glitter on any spots you may have missed. Set aside to dry. Once they’re good and dry, put each letter in a ziplock, and then put all 3 ziplocked letters into another ziplock for storage until your wedding. The ziplocks are so that they don’t bump into each other and mess up the glitter, and also so they don’t get glitter on other things while they’re being stored or transported.

6. Be happy with your crafty self and finish up your wedding shows. Oh.. and give the fianc√©e some kisses. ūüôā

Oh! And if you make a base for the letters, I’m sure you could use these for cake toppers too. Another idea would be for Mr. And MRS. letters.



The INSPIRATION TEASERS – Details & Decorations

4 04 2009

Decorations & Details


So there they are. ūüôā Some snapshots inside my brain for my wedding. On this one little board are 17 of the different DIY projects that I plan to take on. (Did I really just say 17 of the projects… as in there are more?? I think I’ve lost it. lol) ¬†


The colors, the textures, the tons of DIY ideas, the everything are just… so romantic, and soft, modern with a twinge of vintage. I love it all. We shall see what of all of this I can¬†achieve. Making inspiration boards is very helpful to clarifying to yourself what you want, especially if your mind goes a mile a minute with tons of ideas like mine does. If anything I have too many ideas for the wedding. haha.


A good resource if you don’t have or know how to use Adobe InDesign like I made these in, is Polyvore. Polyvore is a website that you can take snippets and pictures of things online and gather them into neat collages of inspirational coolness… even if you know nothing about image editing! It is super easy.


We will be at the 6 month mark next Friday. Why does that make me feel a little panicky? lol Maybe it’s not panicky. Maybe it’s excited. ūüôā If it is panicky, then it’s because of my insane amount of DIY to do.¬†


Until next time…


Inspiration Teasers 


3 04 2009

Hi-dee ho, bloggerinos. ūüôā

Today is flower day at Artsy Bride. Behold!


I am in a mini pickle with the flowers… a sweet gherkin if you will. ūüėõ
I cannot decide between bold bright colors like the first bouquet on the board (top left corner) or more subdued, garden textured, pale colors. My favorite image of all of these is definitely the first one, the gorgeous colored bouquet with the teal ribbon around the stems that so conveniently matches my colors… it is just gorgeous. But if I am going to DIY my flowers I have to be able to find these and affordable sources of flowers are limited, and then the selections of said affordable sources are even more limited. Another option would be to stick with a single type of flower or color which I could do with my affordable options. Then there is the option of a candlelight reception as well. Ahhh decisions, decisions. More to come on this later!

signing out until the next post…

The Artsy Bride ūüôā